Acetic acid 96% Manufacturer, Supplier, Exporter

Chemical and physical data
Ignition temperature	463 C
Solubility	(20 C) soluble
Saturation concentration (air)	38 g/m3 (20 C) Air
Melting point	16.6 C
Density	1.05 g/cm3 (20 C)
pH value	2.5 (10 g/l, H₂O, 20 C)
Boiling point	117.9 C
Vapor pressure	15.2 hPa (20 C)
Explosion limit	4 - 19.9 %(V)
Flash point	40 C
Evaporation number	24

Safety information
R Phrase	R 10-35 Flammable.Causes severe burns.
S Phrase	S 23-26-36/37/39-45 Do not breathe vapour.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
Categories of danger	flammable, corrosive
Hazard Symbol	Corrosive
Storage class	3 Flammable Liquids
WGK	WGK 1 slightly water endangering
Disposal	4 Liquid organic acids or solutions should be diluted, if necessary, and carefully neutralized with sodium hydrogen carbonate (Cat. No. 106323) or with sodium hydroxide (Cat. No 106462). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535).

Transport information
Declaration (transport by sea) IMDG-Code	UN 2790 ACETIC ACID SOLUTION, 8, III, Segregation Group: 1 (Acids)
Declaration (transport by air) IATA-DGR	UN 2790 ACETIC ACID SOLUTION, 8, III

Acetic acid 96%

Specifications
Assay (alkalimetric)	96.0 %
Colour	10 Hazen
Acetaldehyde	2 ppm
Chloride (Cl)	0.5 ppm
Phosphate (PO₄)	0.5 ppm
Sulphate (SO₄)	0.5 ppm
Ag (Silver)	0.050 ppm
Al (Aluminium)	59.4 - 60.6 %
As (Arsenic)	0.01 ppm
Au (Gold)	0.010 ppm
B (Boron)	0.100 ppm
Ba (Barium)	0.020 ppm
Be (Beryllium)	59.4 - 60.6 %
Bi (Bismuth)	0.100 ppm
Ca (Calcium)	0.050 ppm
Cd (Cadmium)	59.4 - 60.6 %
Co (Cobalt)	0.010 ppm
Cr (Chromium)	0.020 ppm
Cu (Copper)	59.4 - 60.6 %
Fe (Iron)	0.100 ppm
Ga (Gallium)	0.050 ppm
Ge (Germanium)	0.050 ppm
In (Indium)	0.050 ppm
K (Potassium)	0.100 ppm
Li (Lithium)	0.010 ppm
Mg (Magnesium)	0.050 ppm
Mn (Manganese)	0.010 ppm
Mo (Molybdenum)	0.020 ppm
Na (Sodium)	0.500 ppm
Ni (Nickel)	0.020 ppm
Pb (Lead)	0.020 ppm
Pt (Platinum)	0.100 ppm
Sn (Tin)	0.050 ppm
Sr (Strontium)	0.010 ppm
Ti (Titanium)	0.100 ppm
Tl (Thallium)	0.050 ppm
V (Vanadium)	0.010 ppm
Zn (Zinc)	0.050 ppm
Zr (Zirconium)	0.100 ppm
Substances reducing potassium dichromate	conforms
Substances reducing potassium permanganate	conforms
Evaporation residue	5 ppm
Dilution test	conforms